The waterproofness of this jacket is increased with taped main seams to keep you dry in case of bad weather.
Warm and comfortable, this functional jacket lets you enjoy your skiing in the best conditions.
What type of fill is used to give my jacket warmth?
To help to keep you warm, we use recycled fill (60 g/mยฒ on the arms and 100 g/mยฒ on the body). This synthetic polyester-based fill traps air, depending on the size of its fibers, to insulate you from the cold.
Which components added to the fill give it warmth?
As well as its filling, your jacket’s waterproof zippers, collar, hem tightening, and adjustable cuffs offer better protection against the cold and damp for a warmer feeling.
“Coated” jacket: What are the advantages of this coating?
The coating is a waterproofing material spread over the inner surface of a fabric. It prevents water from seeping into the garment but allows the water vapor produced by the body’s physical activity to escape. So you stay dry for greater comfort while practicing your sport.
How is the water resistance of a jacket measured?
The resistance of a fabric is measured by the height of a water column in mm that can be supported by the fabric (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. A fabric with a waterproof rating of 5,000 mm is therefore resistant to the pressure exerted by a 5,000 mm column of water.
Which parts of the jacket protect me from bad weather?
The 150 jacket was rigorously developed and assembled to stop water from getting in and to prevent wind-chill, so you can brave the bad weather (rain, snow, wind, etc.). We have checked the waterproofness of this product in use in various weather conditions over several days.
Why is water-repellency needed for my jacket?
The water-repellent property of a fabric is its capacity to make water run off its surface without absorbing it. This jacket features water-repellent components that extend its weather resistance. The fabric is made water-repellent by treating its outer surface. However, this property may deteriorate with use.
How do I restore my jacket’s water-repellent properties?
Remember that water-repellency can be restored. To do this, put the jacket in the tumble dryer on a synthetics cycle for 10 to 15 minutes.
You can also use a waterproofing spray (sold in our stores): Spray the product evenly over the entire garment, then allow to dry for 10 to 12 hours).
What is a “breathable” jacket?
This garment wicks away the water vapor produced by your body when exercising. To see if a fabric is breathable, its resistance to evaporative heat (RET) is measured in a standardized ISO 11092 test. The lower the RET, the more breathable the fabric. The 150 jacket has an RET of 7. However, it’s the technical solutions (zippers, vents, mesh) Wedยze uses that reduce the condensation inside the garment and maximize breathability.
What is the cut of the 150 jacket?
Regular Fit. The jacket has sides that fall straight and remain parallel without trying to follow the shape of your chest. The inner volume lets you wear this jacket with a 1st and 2nd technical layer.
How to dress to stay warm on the slopes?
To keep warm and dry, just apply the 3 technical layers rule:
– Layer 1 or 2nd skin, to stay dry.
– Layer 2 or an insulating layer, to keep in the heat.
– Layer 3 or a protective layer, to protect against bad weather.
In case of a fall, how can I stop the snow from getting in?
The adjustable jacket hem and elastic sleeve cuffs keep out snow and drafts while skiing, and especially in case of a fall.
A score for comparing the products’ environmental impact
The environmental impact of the product is calculated over its entire lifecycle and using various indicators. An overall ABCDE score is given to help you easily identify products with the best environmental performance by comparing products of the same type (T-shirts, pants, backpacks, etc.).
Decathlon is committed to displaying the environmental information of its products.
For more information: http://sustainability.decathlon.com/
Composition
Upper part – Main fabric : 100.0% Polyamide
Lower part – Main fabric : 100.0% Polyester cationic
Padding : 100.0% Polyester cationic
Main lining : 100.0% Polyester cationic
Synthetic fur : 90.0% Acrylic, Synthetic fur : 10.0% Polyester cationic
Coating : 100.0% Polyurethane
Waterproof : CORRECT: 3,000 mm-rated coating and partially taped seams.
Warmth : Fill for insulation.
Adjustable : Adjustable jacket hem and cuffs, removable synthetic fur hood.
Breathability : Breathable fabric.
Water repellent : Water-repellent outer fabric that does not get waterlogged.
Pockets : 4 pockets: 2 hand, 1 ski pass, 1 inner.



































Reviews
There are no reviews yet.